LIKE NEW – SCBA / Respirator fit testing doesn’t have to be difficult, when the PortaCount fit tester makes it easy and with complete confidence in the test results. Windows-compatible software that comes with the rental unit prompts the respirator wearer to perform the fit exercises one by one. The PortaCount measurements are made with the wearer performs dynamic movements and breathing exercises that stress the respirator seal with real-world body movements. Results are immediate and unambiguous with a clear “pass” or “fail”. The PortaCount can be used to fit test almost any respirator, including elastomeric half and full-face masks, PAPRs, SCBA and Class-100 and Class-99 disposable (filtering face-piece) respirators.
Note: The PortaCount Plus fit tester requires a sampling adapter mask, which can be obtained from your mask manufacturer or distributor, usually at little or no charge. Portacount is a registered trademark of TSI Incorporated.The TSI PortaCount Plus Fit Tester Model 8020 comes with power supply, download cable, an AC adapter, carrying case and operating manual.
- OSHA-accepted for all fit testing regulations.
- Test an employee’s own mask.
- Please Allow 2 – 3 weeks for delivery (unit will be shipped for calibtation)
|Fit Factor Range||1 to greater than 10,000|
|Concentration Range||0.01 to 5 x 105 particles/cm3|
|Particle Size Range||0.02 to greater than 1 µm|
|Fit Factor Accuracy||± 10% of reading|
|Power||Alkaline batteries, 3 hours operation, or 115V|
|H x W x D||140 x 190 x 241 mm|